Product Solutions

Mold Solutions - Mold Inspections Los Angeles
Mold Inspections Los Angeles reviews the machines and types of products used for a moderate level of mold contamination. These machines are pieces of the puzzle that help control the environment during mold remediation. Most of the smell generated from a typical mold remediation are from the plastics, tape and chemicals used to clean the mold remediation materials. See Below.

Mold Inspections Los Angeles - mold remediation - negative air machine
By creating negative pressure, air scrubbers capture the contaminated air and produces clean non-contaminated air by passing through a HEPA filter. By using a negative pressure environment this will help to contain the mold, dust, particles and odors created in the workspace contained by a barrier.

Applications:

Air always flows from areas of higher pressure to areas of lower pressure.
Creating and maintaining negative pressure creates inward airflow direction through any leaks or openings in the containment barrier.
Prevent airborne contaminants from escaping into and contaminating other parts of the work area.
Can be used during mold or asbestos remediation.

The process of utilizing a negative air machine can be the differences between a successful and non successful mold remediation job. Negative air machines, themselves, must be cleaned by personnel outside the work zone and shortly after heavy debris removal.

Mold Inspections Los Angeles - moisture removal - dehumidifiers
A dehumidifier is a appliance will reduce the amount of humidity in the air. Removing the amount of humidity in the air can reduce the ability of mold growth indoors creating a healthier environment. High levels of humidity are often uncomfortable for humans.

Applications:

remove moisture from the air by mechanical / dessicantive methods - decrease in relative humidity
Mechanical -refrigerative methods use a small fan to draw the indoor air over cool coils, like your air conditioner this can collect water and be removed from the area.
Dessicantive methods will heat the air passing by to decrease the relative humidity.
Air conditioners will typically remove moisture from the air. This moisture must be drained from the unit.

You can add more details in this area. You can also copy each formatted area on this page and paste in a new detailed area on this html page to include as many product details areas as you require.

Mold Inspections Los Angeles - Sampling airborne mold spores
Mold Inspection after mold remediation by a third party representative can help you assess the current conditions of your building or property. To monitor air borne spores collect with an Air-O-Cell cassette or similar particle sampling device, and compare these results with the outdoor environment.

Applications:

During mold remediation samples could indicate species of mold within the enclosed zone.
After mold remediation samples inside the containment zone should be less than or equal to outdoor levels.

No specific guidelines have been established by an authoritative body concluding the process and standards used to evaluate a mold remediation assessment. Contact Mold Inspections Los Angeles to learn about more details in this area.